Freeborn Cope and Pattern sets are designed to be versatile and easy to use.
Our 6 cutter sets are designed with a common minor diameter, allowing for both cope and pattern cuts to be made without a fence adjustment between cuts (standard 1/4″ x 1/2″ tongue only).
Options are available for a wide range of tongue and groove dimensions. (See chart below)
Opposite rotation and eased edges (EE) are available (20% added to list price). Please note all special instructions for eased edges (EE) to avoid damage to your set.
|Number of Cutters||6|
|Wings per Cutter||3|
|Standard Cutter Rotation||Counter Clockwise, Wood Face Down|
Center Groover Options
Center groover sets can be exchanged at no additional cost to change to the following tongue and groove dimensions. Please refer to the listed part numbers when ordering through your dealer:
|PC-10-220-501||1/4″ x 1/2″|
|PC-10-220-502||1/4″ x 5/8″|
|PC-10-220-503 (standard groover option)||1/4″ x 3/8″|
|PC-10-220-601||5.5mm x 1/2″|
|PC-10-220-602||5.5mm x 1/2″|
|PC-10-220-604||5mm x 3/8″|
|PC-10-220-605||5mm x 1/2″|
|PC-10-220-607||5.2mm x 3/8″|
|PC-10-220-608||5.2mm x 1/2″|
|PC-10-220-609||3/8″ x 1/2″|
|PC-10-220-610||3/8″ x 3/8″|
|PC-10-220-700 GLASS OPTION (for rubber extrusion)||9/64″ x 1/4″|
|PC-10-220-701 (Eased Edge Glass Groover, Pattern Side Groover)||3/8″ Eased|
|PC-10-220-702 (Eased Edge Glass Groover, Pattern Side Groover)||1/2″ Eased|